Panasonic 26PEU1U6 Installation Instructions - Page 39

WARNING Loose wiring may cause the terminal to overheat or result in unit malfunction. A fire hazard may also exist. Therefore, ensure that all wiring is tightly connected. When connecting each power wire to the corresponding terminal, follow the instructions on "How to connect wiring to the terminal" and fasten the wire securely with the fixing screw of the terminal plate. 4-4. How to Connect Wiring to the Terminal For stranded wiring (1) Cut the wire end with a wire cutter or wire-cutting pliers, then strip the insulation to expose the stranded wiring about 3/8". (Fig. 4-1) (2) Using a Phillips head screwdriver, remove the terminal screw(s) on the terminal plate. (3) Using a ring connector fastener or pliers, securely clamp each stripped wire end with a ring pressure terminal. (Fig. 4-1) (4) Place the ring pressure terminal, and replace and tighten the removed terminal screw using a screwdriver. (Fig. 4-2) Strip 3/8" Stranded wire Ring pressure terminal Fig. 4-1 Special washer Wire Screw Ring pressure terminal Terminal plate Wire Fig. 4-2 Screw and Special washer Ring pressure terminal 39 1BOBTPOJD@1"$J@*OEPPS6OJU@64MF