Panasonic 3-MOS P2 Hand-held Camcorder Advanced Operating Instructions - Page 104
TV/Monitor (playback/dubbing), Extension control unit (AG-EC4G), Control Unit
View all Panasonic 3-MOS P2 Hand-held Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Connecting external units (continued) TV/Monitor (playback/dubbing) BNC cable (optional) HDMI cable (optional) Video pin cable (optional) Connect one of these cables to the terminal on the television or monitor. TV/Monitor Audio pin cable (optional) White: CH1 (left channel) sound Red: CH2 (right channel) sound • VIERA Link is not supported. Please be aware that when using an HDMI cable and connecting this camera to a device that supports VIERA Link, the VIERA Link of other devices may not work in some cases. • From the HDMI OUT terminal, SD signals (480i, 576i) are converted to progressive signals (480P, 576P) then output. • Simultaneous display with the LCD monitor and the viewfinder is not possible when outputting video from the SDI OUT terminal. For simultaneous display, set SDI OUT on the setting menu OUTPUT SEL screen to OFF and EVF MODE on the DISPLAY SETUP screen to ON. • Use a BNC cable (optional) with double-shield that is equivalent to 5C-FB to connect to SDI OUT terminal. • Please use a double-shielded HDMI cable (optional). • It is recommended that you use a Panasonic HDMI cable. Extension control unit (AG-EC4G) • Some of the functions can be controlled remotely by connecting an extension control unit AG-EC4G (optional). When AG-EC4G is connected to the REMOTE terminal of the camera recorder and the POWER switch of the AG-EC4G is set to ON, the camera recorder enters the remote control mode automatically. When the POWER switch is set to OFF, the camera recorder exits the remote control mode. • For details, please refer to the AG-EC4G Operating Instructions and the "Cautions in using the Extension Control Unit" (Page 165). BNC cable (optional) 10-pin cable (supplied with AG-EC4G) VIDEO OUT CAM/BS Monitor 104 Extension control unit AG-EC4G (optional)