Panasonic 3-MOS P2 Hand-held Camcorder Advanced Operating Instructions - Page 112
Using the USB HOST mode, Viewing hard disk drive information
View all Panasonic 3-MOS P2 Hand-held Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Using a hard disk drive (PC mode: USB host) (continued) Using the USB HOST mode Usable hard disk drives • Hard disk drives connectable via USB 2.0 • The units compatible with the storage unit that has Panasonic USB I/F Refer to the support site at the following Website for the compatible units. http://pro-av.panasonic.net/ • While the USB HOST mode supports USB bus power (5 V, 0.5 A), some hard disk drives may not activate. If this is the case, power must be supplied in a different way. • Do not connect more than one drive even through a hub or any other device. Even with devices other than a hard disk drive, do not connect to the drive together with the hard disk drive through a hub. • The unit does not support a hard disk drive of 2 TB (2048 GB) or more. • To prevent copying or formatting problems from occurring during connection to a hard disk drive, be sure that the camera's battery is sufficiently charged or use the AC adaptor. • Versions 2.** and later of the P2 STORE (AJ-PCS060G) support USB host mode for this unit. Versions 1.** cannot connect. Please upgrade. Viewing hard disk drive information You can view the information on the hard disk drive connected via USB with the following steps. 1 Switch the mode to USB HOST. • "Switching to the USB HOST mode" (Page 111) • The thumbnail screen is displayed. (USB HOST is displayed in the bottom right.) 2 Connect the hard disk drive to the camera- recorder via USB 2.0. 3 Press the MENU button and select HDD → EXPLORE from the thumbnail menu. The screen provides the information about the hard disk drive. For Type S or P2 STORE Press the EXIT button. ↑↓ Press the SET button. For the FAT Press the EXIT button. ↑↓ Press the SET button. 112