Panasonic 3-MOS P2 Hand-held Camcorder Advanced Operating Instructions - Page 92
Formatting SD memory cards, Setting the thumbnail display mode, Operation lever to select YES.
View all Panasonic 3-MOS P2 Hand-held Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Thumbnail operations (continued) Formatting SD memory cards SD memory cards can also be formatted from the thumbnail screen. With an SD memory card inserted into the camera-recorder, perform the following operation: 1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode. The thumbnail screen appears on the LCD monitor. 2 Press the MENU button and select OPERATION → FORMAT from the thumbnail menu. • The following screen appears. Select SD CARD and press the SET button on the Operation lever. • Select EXIT if formatting is not required. Setting the thumbnail display mode The thumbnail display mode can be customised to suit your preferences. 1 Turn the POWER/MODE switch to set to PB/ THUMBNAIL mode. The thumbnail screen appears on the LCD monitor. 2 Press the MENU button and select THUMBNAIL → SETUP from the thumbnail menu. The following screen appears. 3 The following screen appears. Use the Operation lever to select YES. The SD memory card is formatted. • SD memory cards can also be formatted from the menu screen. (Page 150) • Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered. INDICATOR: Select which indicators you want to show on thumbnails and which you want to hide. ALL HIDE: ON: All indicators (MARKER, TEXT MEMO, WIDE, PROXY) are not displayed. OFF: Indication/No indication will be set depending on the following menu. The factory settings are as follows. MARKER: Switches the shot mark marker between indication and no indication (ON/OFF). The factory setting is ON (indication). TEXT MEMO: Switches the text memo marker between indication and no indication (ON/OFF). The factory setting is ON (indication). WIDE: Switches the wide marker between indication and no indication (ON/OFF). The factory setting is ON (indication). PROXY: Switches the proxy indicator between indication and no indication (ON/OFF). The factory setting is ON (indication). 92