Panasonic 3-MOS P2 Hand-held Camcorder Advanced Operating Instructions - Page 144

Setup menu list (continued) AUDIO SETUP screen (continued) Item Setting Notes INT MIC Determines whether or not input from the internal microphone is used during recording. ON: Uses internal microphone input. OFF: Does not use internal microphone input. MIC GAIN1 Sets the level of an external microphone connected to the AUDIO INPUT1 terminal. - 40dB, - 50dB, - 60dB MIC GAIN2 Sets the level of an external microphone connected to the AUDIO INPUT2 terminal. - 40dB, - 50dB, - 60dB 1394 AUDIO OUT Selects audio channel output to 1394 OUT in DVCPRO or • Available only when SYSTEM DV mode. MODE is set to 480-59.94i or CH1/CH2, CH3/CH4 576-50i and REC FORMAT is set to DVCPRO or DV. AUDIO OUT Sets the audio signal output from the AUDIO OUT terminal (pin jack), HDMI OUT terminal, headphone terminal, and built-in speaker during P2 card playback. CH1/CH2: CH1 output = CH1 signals, CH2 output = CH2 signals CH1: CH1 output = CH1 signals, CH2 output = CH1 signals CH2: CH1 output = CH2 signals, CH2 output = CH2 signals CH3/CH4: CH1 output = CH3 signals, CH2 output = CH4 signals CH3: CH1 output = CH3 signals, CH2 output = CH3 signals CH4: CH1 output = CH4 signals, CH2 output = CH4 signals ___indicates the factory setting. 144