Panasonic AE3000U Operating Instructions - Page 25

J Adjustment example Project a commercial test signal for picture adjustment on the screen and press the WAVEFORM button. 100% 50% 0% ENTER ENTER Signal level Adjust to 100% 100% 50% Image displayable area 0% Adjust to 0% Monitor position With COMPUTER (except 1080) or HDMI (Expand) Adjust to 100% 100% Signal level 50% 0% Adjust to 0% Image displayable area Monitor position Q Adjusting with luminance options 1. Press the ENTER button several times to display FULL SCAN(Y)/SINGLE LINE SCAN(Y). In SINGLE LINE SCAN mode, select the required adjusting point by pressing F G. 2. Press the PICTURE ADJUSTMENT button and display the BRIGHTNESS by pressing F G. When ADVANCED MENU is displayed, press the button again to switch to the PICTURE menu. Remote control operation 3. Adjust by pressing I H. Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE). Setting range: -32 to +32 4. Press F G to display the CONTRAST. 5. Adjust by pressing I H. Adjust the up line of the waveform to 100 % (100 IRE). Setting range: -64 to +64 FULL SCAN(Y)/SINGLE LINE SCAN(Y) BRIGHTNESS Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) CONTRAST Adjust the top line of the waveform to 100 % (100 IRE) Q Adjusting with RGB options 1. Press the ENTER button several times to display the required R/G/B waveform option. In SINGLE LINE SCAN mode, select the required adjusting point by pressing F G. 2. Press the PICTURE ADJUSTMENT button and display the BRIGHTNESS R/BRIGHTNESS G/ BRIGHTNESS B by pressing F G. When PICTURE menu is displayed, press the button again to switch to the ADVANCED MENU. 3. Adjust by pressing I H. Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE). Setting range: -16 to +16 4. Press F G to display the CONTRAST R/ CONTRAST G/CONTRAST B. 5. Adjust by pressing I H. Adjust the up line of the waveform to 100 % (100 IRE). Setting range: -32 to +32 FULL SCAN(R)/SINGLE LINE SCAN(R) BRIGHTNESS R Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) CONTRAST R Adjust the top line of the waveform to 100 % (100 IRE) FULL SCAN(G)/SINGLE LINE SCAN(G) BRIGHTNESS G Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) CONTRAST G Adjust the top line of the waveform to 100 % (100 IRE) FULL SCAN(B)/SINGLE LINE SCAN(B) BRIGHTNESS B Adjust the bottom line of the waveform to 0 % (0 or 7.5 IRE) CONTRAST B Adjust the top line of the waveform to 100 % (100 IRE) Basic Operation ENGLISH - 25