Panasonic AE3000U Operating Instructions - Page 40

LENS CONTROL Remote control Control panel See "Navigating through the MENU" on page 29. See "Main menu and sub-menu" on page 30. NOTE: • The saved lens memory adjustment accuracy is not guaranteed. • If the memorized ZOOM/FOCUS adjustment is not accurate enough, adjust the ZOOM/FOCUS menu again. • If the power supply is stopped while loading or saving the lens memory, saved adjusted settings may differ from the original after restart the projector. Adjust the ZOOM/FOCUS menu again. ZOOM/FOCUS You can use the 2 different test patterns to adjust the focus and zoom of the image. See "Lens shift and positioning" on page 16. 1. Press ENTER to display test pattern 1. Press F G to adjust the focus and I H to adjust the zoom. LENS MEMORY LOAD You can access the saved lens control settings instantly. 1. Select a setting from LENS MEMORY 1 - 3. 2. Press the ENTER button to activate. NOTE: • The option that contains no saved adjustment will not be displayed. • If there is no saved setting, the LENS MEMORY LOAD menu will not be selectable. LENS MEMORY SAVE You can save and name the adjusted ZOOM/FOCUS, H-AREA POSITION and V-AREA POSITION settings in memory. 1. Adjust ZOOM/FOCUS, H-AREA POSITION and V-AREA POSITION. 2. Select the LENS MEMORY SAVE and press the ENTER button. 3. Select the required memory setting and press the ENTER button. 4. The confirmation screen will be displayed. Select OK and press the ENTER button. Indicated with ★ is in use, and ✩ is empty. 5. Name the lens memory setting. Use F G I H to specify the location of the required character to enter and press the ENTER button. LENS MEMORY NAME INPUT ALL DELETE RETURN ENTER FOCUS ZOOM 2. Press ENTER to display test pattern 2. Press F G to adjust the focus and I H to adjust the zoom. RETURN ENTER FOCUS ZOOM 3. Press ENTER to display the projected image. You can confirm the adjustment is fit to the projected image. 4. Press MENU or RETURN to return to the previous menu, or press repeatedly to escape the menu mode. NOTE: • When the projector and/or the screen is tilted, adjust the focus at the center of the image. The upper and lower edge might be out of focus. • When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu. See "KEYSTONE" on page 39. OK CANCEL 6. Repeat step 5 until you finish the text line. You can enter up to 16 characters. Move the cursor to ALL DELETE and press the ENTER button to delete all the entered text line. Press the DEFAULT button to delete the last entered character or indicted with the cursor in the text box. To insert a character in the entered text line, move the cursor to the text box to select the required place and press G then perform step 5. 7. Select OK and press the ENTER button to set the entered text as a name. NOTE: • If you leave the text box empty and save, the default memory number will stay as a name. Settings 40 - ENGLISH