Panasonic AW-HE38H Operating Instructions - Page 93

Web screen configurations (continued) „„Advanced network setting screen [Advanced] Click the [Advanced] tab in the network setup screen [Network]. Settings relating to the FTP, NTP, UPnP, and HTTPS functions are performed here. Click the links to each item to move to the respective setting page. zzFTP Configure settings related to the FTP server. Notes ●● CGI control from an external device is required to use the FTP function. ●● To use the FTP function, set the priority mode to "SD card". For details, refer to "Priority mode tab [Priority Mode]" (page 65). ●● When data is being transferred to an FTP server, recording to and playback from an SD card are not possible. Also, the Play List screen cannot be displayed. FTP server address Enter the IP address or host name of the FTP server to which image data is to be sent. Maximum number of characters 0 to 128 half-size characters Characters that can be Half-size alphanumeric characters, entered half-size symbols :. _ - Factory settings: blank Note ●● To enter the host name of [FTP server address], you need to configure the [DNS] settings on the [Network] tab of the network setup screen [Network]. (page 91) Directory name Enter the name of the directory to save the video data to be sent. Maximum number of characters 0 to 256 half-size characters Characters that can be entered Half-size alphanumeric characters, half-size symbols However, the following characters cannot be entered. " & : Factory settings: blank User name Enter the user name (login name) for accessing the FTP server. Maximum number of characters 0 to 32 half-size characters Characters that can be entered Half-size alphanumeric characters, half-size symbols However, the following characters cannot be entered. " & : ; ¥ Factory settings: blank Password Enter the password for accessing the FTP server. Maximum number of characters 0 to 32 half-size characters Characters that can be entered Half-size alphanumeric characters, half-size symbols However, the following characters cannot be entered. " & Factory settings: blank Note ●● When you enter a password and click the [Set] button, nothing is displayed in the input field but the setting is complete. Control port Enter the port number for FTP server control. Port Nos. that can be selected: 1 to 65535 The following port numbers are used by the unit so they cannot be used. 20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000 to 61000 Factory settings: 21 FTP mode Select the FTP communication mode from Passive mode and Active mode. Factory settings: Active 93