Panasonic AW-HS50 Operating Instructions - Page 41
Setting the ancillary data, When an HD format is used, 14] SYSTEM Menu, AUX Anci, PGM Anci
View all Panasonic AW-HS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4. System settings 4-1-2. Setting the ancillary data A function for allowing the V ancillary data and embedded audio data of the SDI input signals to pass through can be set. When an HD format is used: The ancillary data starting with line 9 is allowed to pass through. When an SD format is used: The ancillary data starting with line 12 is allowed to pass through. When 1080/59.94i, 720/59.94p or 1080/50i has been selected as the unit's video format setting, it is not possible to allow the ancillary data and embedded audio data to pass through even if SD format signals (480/59.94i or 576/50i) have been input in the Dot by Dot mode or up-converter (UC) mode. Refer to "2-1-1. Setting the input mode". [14] SYSTEM Menu 4. AUX Anci On or Off is selected here as the setting for the AUX output signals. On: The ancillary data and embedded audio data of the SDI input materials selected by the AUX bus are allowed to pass through. Off: The ancillary data and embedded audio data are not allowed to pass through. The data is not allowed to pass through when KEY OUT or CLN material has been selected. [14] SYSTEM Menu 5. PGM Anci On or Off is selected here as the setting for the program output signals. On: The ancillary data and embedded audio data of the SDI input materials selected by the PGM bus are allowed to pass through. Off: The ancillary data and embedded audio data are not allowed to pass through. [14] SYSTEM Menu 6. PVW Anci On or Off is selected here as the setting for the PVW output signals. On: The ancillary data and embedded audio data of the SDI input materials selected by the PST bus are allowed to pass through. Off: The ancillary data and embedded audio data are not allowed to pass through. [14] SYSTEM Menu 7. MV Anci PGM, PVW or Off is selected here as the setting for the output signals of the multi view display. PGM: The ancillary data and embedded audio data of the SDI input materials selected by the PGM bus are allowed to pass through. PVW: The ancillary data and embedded audio data of the SDI input materials selected by the PST bus are allowed to pass through. Off: The ancillary data and embedded audio data are not allowed to pass through. Note The sounds generated when the video signals are switched will be added to the embedded audio data which is output from the unit. 41