Panasonic AW-HS50 Operating Instructions - Page 56
Displaying the camera icon, Operating the unit's parameters, from the AW-RP50
View all Panasonic AW-HS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
7. Function for linking up with the remote camera controller 7-2-4. Displaying the camera icon When signals from the remote camera selected using the AW-RP50 are supplied to the unit, the " " camera icon can be displayed on the multi view display. The camera icon is displayed in front of the name of the material which is displayed on the split screen. [Settings established at the unit] Set the input signal status to "On" (display) by operating the menu item below. [8] MultiView Out/Frame Menu 6. Input Status [Settings established at the AW-RP50] Set the remote cameras which will correspond with the unit's image inputs. (On the AW-RP50, SDI IN 1 to 4 are displayed as INPUT1 to 4 while DVI-IN is displayed as INPUT5.) When a remote camera has been selected by the AW-RP50, the function (CAMSEL) for sending the selection information is enabled. 7-2-5. Operating the unit's parameters from the AW-RP50 The unit's settings can be changed by operating the PAN/TILT lever and ZOOM button on the AW-RP50. [Settings established at the AW-RP50] Set what is to be targeted by the PAN/TILT lever and ZOOM button operations in the switcher (SW). [Unit's menu items which can be operated] When the following submenus are displayed on the unit, the PAN/TILT lever and ZOOM button on the AW-RP50 operations take effect. [3] PinP Menu The PinP position can be changed using the PAN/TILT lever, and the PinP size can be changed using the ZOOM button. [6] ChromaKey Menu While the chroma key marker is displayed, the chroma key marker position can be changed using the PAN/TILT lever, and the chroma key marker size can be changed using the ZOOM button. [2] WIPE Menu The wipe start position can be changed using the PAN/TILT lever. 7-2-6. Sending and receiving the tally information The information of the ON AIR tally sent by the unit over the network can be received by the AW-RP50. [Settings established at the AW-RP50] Set the remote cameras that correspond to the unit's image input. (On the AW-RP50, SDI IN 1 to 4 are displayed as INPUT1 to 4 while DVI-IN is displayed as INPUT5.) Enable the function used to receive the information of the ON AIR tally sent by the unit over the network. 56