Panasonic BT-L2150PJ Operating Instructions - Page 18

Main Menu Menu configuration MAIN MENU MARKER VIDEO CONFIG SYSTEM CONFIG GPI INPUT SELECT AUDIO DISPLAY SETUP CONTROL HOURS METER CONT./BACK. BACKLIGHT STATUS DISPLAY SETUP LOAD COLOR SPACE POWER DOWN GPI CONTROL GAMMA SELECT COLOR TEMP. SHARPNESS MODE SHARPNESS H SD ASPECT MARKER 16:9 4:3 CENTER D93 D65 VAR1 VAR2 [WHITE BALANCE VAR1]* [WHITE BALANCE VAR2]* NTSC SETUP PC INPUT SELECT EMBEDDED SELECT CLOSED CAPTION CAPTION CHANNEL KEY LOCK AUTO SETUP H-POSITION V-POSITION PHASE CLOCK WXGA/XGA RESET OPERATION LCD *[WHITE BALANCE VAR1-2] COLOR TEMP. GAIN RED GAIN GREEN GAIN BLUE BIAS RED BIAS GREEN BIAS BLUE RESET MARKER Underlined values indicate factory defaults. Sub menu MARKER*1 16:9*2 4:3*3 Setting OFF ON OFF 4:3 93%*4 88%*4 80% OFF 93% 88%*4 80% Description Turns the MARKER setting on and off. Selects and displays marker type for 16:9 aspect ratio. No marker display 4:3 marker 88 % area marker 93 % area marker 80 % area marker Selects and displays marker type for 4:3 aspect ratio. No marker display 93 % area marker 80 % area marker 88 % area marker CENTER OFF ON Displays the center marker. No marker display Displays the marker *1 When CLOSED CAPTION is set to ON, this setting automatically turns to OFF. *2 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode. *3 This setting is enabled for SD signal input in 4:3 aspect ratio mode. *4 The effective horizontal area of SD signals meets the EIA-RS170A standards for NTSC and ITU-R BT.470-4 standards for PAL. 18