Panasonic BT-L2150PJ Operating Instructions - Page 20
VIDEO CONFIG, WB Adjustment Mode
View all Panasonic BT-L2150PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Main Menu (continued) VIDEO CONFIG Underlined values indicate factory defaults. Sub menu GAMMA SELECT*1 Setting 2.2 2.35 COLOR TEMP. D93 D65 VAR1*3 VAR2*3 SHARPNESS MODE*1 SHARPNESS H*1 HIGH*2 LOW 0 to 30*2 SD ASPECT*1 4:3 16:9 Description Selects gamma curve. Selects the gamma 2.2 curve. Selects the gamma 2.35 curve. (A mode that approximates CRT display capability.) Selects color temperature. Equivalent to a color temperature of 9,300 K Equivalent to a color temperature of 6,500 K WB adjustment mode WB adjustment mode Selects the width of outline correction edge. Thin edge Wide edge Sets horizontal outline correction. The item display moves to the lower part of the screen during adjustment. Sets the aspect ratio for SD signal input. 4:3 aspect ratio 16:9 aspect ratio *1 This function is not available when PC is selected in the INPUT SELECT menu (Jpage 21). *2 The following sharpness values are available and the settings for the selected input signal is displayed. Adjustment status during selection appears at the bottom right of the screen. 1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0) 2) HD for input other than VIDEO (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H: 0). 3) SD for input other than VIDEO (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0). *3 Selecting VAR1, VAR2 engages the WB adjustment mode (J see below). ■ WB Adjustment Mode Select VAR1 and VAR2 for COLOR TEMP. in the VIDEO CONFIG menu to make WHITE BALANCE VAR1 and WHITE BALANCE VAR2 (WB) adjustments. Underlined values indicate factory defaults. Sub menu Setting COLOR TEMP.*4 D93 D65 GAIN RED*5 GAIN GREEN*5 GAIN BLUE*5 BIAS RED*5 BIAS GREEN*5 BIAS BLUE*5 RESET 0 - 1023 (Factory defaults are color temperature values.) • These are the adjustments made before shipment from the factory. -512 to 511 (Factory default: 0) Description Selects the color temperature that will become the basis for adjustment. Equivalent to a color temperature of 9,300 K Equivalent to a color temperature of 6,500 K Adjusts the GAIN elements for RED. Adjusts the GAIN elements for GREEN. Adjusts the GAIN elements for BLUE. Adjusts the BIAS elements for RED. Adjusts the BIAS elements for GREEN. Adjusts the BIAS elements for BLUE. Resets GAIN RED - BIAS BLUE to color temperature values selected under COLOR TEMP. *4 Selecting COLOR TEMP. and pressing [ENTER] after making a change, opens a confirmation screen. Selecting YES and pressing [ENTER] in this screen resets selected GAIN and BIAS values to the selected color temperature values. *5 The item display moves to the lower part of the screen during adjustment. 20