Panasonic BT-L2150PJ Operating Instructions - Page 28

Specifications - bt 200

Page 28 highlights

Specifications ■ General Power input Power supply Current consumption AC: 100 V - 240 V, 50/60 Hz 0.60 A - 0.30 A Power supply Current consumption AC: 100 V - 240 V, 50/60 Hz 0.50 A - 0.25 A ɹɹ indicates safety information. Dimensions (W x H x D): 538 mm x 426 mm x 240 mm (21-3/16 inches x 16-3/4 inches x 9-7/16 inches) (including tilt stand) 538 mm x 374 mm x 70 mm (21-3/16 inches x 14-3/4 inches x 2-3/4 inches) (monitor only, not including tilt stand) 397 mm x 360.5 mm x 240 mm (including tilt stand) (15-5/8 inches x 14-3/16 inches x 9-7/16 inches) 397 mm x 308.5 mm x 70 mm (15-5/8 inches x 12-1/8 inches x 2-3/4 inches) (monitor only, not including tilt stand) Mass: Approx. 7.5 kg (16.53 lb) (including tilt stand) Approx. 6.0 kg (13.23 lb) (monitor only, not including tilt stand) Approx. 5.4 kg (11.9 lb) (including tilt stand) Approx. 3.9 kg (8.6 lb) (monitor only, not including tilt stand) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 20 % to 80 % (no condensation) Storage temperature: - 20 °C to 60 °C (-4 °F to 140 °F) ■ Display panel Dimensions: 54.6 cm (21.5-inch) (effective screen area) Aspect ratio: 16:9 Number of pixels: 1920 x 1080 (FULL HD) Display colors: Approx. 16,700,000 colors View angle (contrast > 10:1): 160° up/down, 170° right/left Dimensions: 39.1 cm (15.4-inch) (effective screen area) Aspect ratio: 16:10 Number of pixels: 1280 x 800 (WXGA) Display colors: Approx. 16,200,000 colors View angle (contrast > 10:1): 140° up/down, 160° right/left ■ Input/output Connectors Video signal input: VIDEO IN terminal: 1 input, BNC x 1 YPBPR IN terminal (Analog component): 1 input, BNC x 3 SDI IN (HD/SD) terminals: SMPTE274M/296M/259M-C/ ITU-R BT.656-4 compliant 2 inputs, BNC x 2 HDMI terminals: 1 input, HDMI terminal x 1 (TYPE A) HDCP compatible, not VIERA LINK compatible PC terminal: 1 input, D-SUB, 15-pin x 1 Vertical frequency: 60.0 Hz - 75.0 Hz Horizontal frequency: 31.5 kHz - 64.0 kHz Dot clock: 25 MHz - 108 MHz Vertical Frequency: 60.0 Hz - 75.0 Hz Horizontal frequency: 31.5 kHz - 60.0 kHz Dot clock: 25 MHz - 83.5 MHz HD/VD signal level: TTL level Audio input: SDI IN (HD/SD) terminals: EMBEDDED AUDIO HD - SDI: SMPTE299M compliant Sampling rate: 48 kHz, synchronous/asynchronous, 8 ch SD - SDI: SMPTE272M compliant Sampling rate: 48 kHz, synchronous, 4 ch HDMI terminal: EMBEDDED AUDIO AUDIO IN terminal (Analog audio input): Pin jack x 2 (stereo) Input level 0.5 Vrms Speaker output: 0.5 W + 0.5 W Headphone output: Stereo minijack M3 x 1, 32 Ω adjustable level GPI terminal: D-SUB, 9-pin x 1 Inrush current, measured according to European standard EN55103-1: 11.0 A 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

28
Specifications
General
Power input
Dimensions (W x H x D):
<BT-L2150P/2150E>
538 mm x 426 mm x 240 mm
(21-3/16 inches x 16-3/4 inches x
9-7/16 inches)
(including tilt stand)
538 mm x 374 mm x 70 mm
(21-3/16 inches x 14-3/4 inches x
2-3/4 inches)
(monitor only, not including tilt stand)
<BT-L1500P/1500E>
397 mm x 360.5 mm x 240 mm
(including tilt stand)
(15-5/8 inches x 14-3/16 inches x
9-7/16 inches)
397 mm x 308.5 mm x 70 mm
(15-5/8 inches x 12-1/8 inches x
2-3/4 inches)
(monitor only, not including tilt stand)
Mass:
<BT-L2150P/2150E>
Approx. 7.5 kg (16.53 lb) (including tilt
stand)
Approx. 6.0 kg (13.23 lb) (monitor only,
not including tilt stand)
<BT-L1500P/1500E>
Approx. 5.4 kg (11.9 lb) (including tilt
stand)
Approx. 3.9 kg (8.6 lb) (monitor only,
not including tilt stand)
Operating temperature:
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity:
20 % to 80 % (no condensation)
Storage temperature:
- 20 °C to 60 °C (-4 °F to 140 °F)
Display panel
<BT-L2150P/2150E>
Dimensions:
54.6 cm (21.5-inch) (effective screen
area)
Aspect ratio:
16:9
Number of pixels:
1920 x 1080 (FULL HD)
Display colors: Approx. 16,700,000 colors
View angle (contrast > 10:1):
160° up/down, 170° right/left
<BT-L1500P/1500E>
Dimensions:
39.1 cm (15.4-inch) (effective screen
area)
Aspect ratio:
16:10
Number of pixels:
1280 x 800 (WXGA)
Display colors: Approx. 16,200,000 colors
View angle (contrast > 10:1):
140° up/down, 160° right/left
Input/output Connectors
Video signal input:
VIDEO IN terminal:
1 input, BNC x 1
YP
B
P
R
IN terminal (Analog component):
1 input, BNC x 3
SDI IN (HD/SD) terminals:
SMPTE274M/296M/259M-C/
ITU-R BT.656-4 compliant
2 inputs, BNC x 2
HDMI terminals:
1 input, HDMI terminal x 1 (TYPE A)
HDCP compatible, not VIERA LINK compatible
PC terminal: 1 input, D-SUB, 15-pin x 1
<BT-L2150P/2150E>
Vertical frequency:
60.0 Hz - 75.0 Hz
Horizontal frequency:
31.5 kHz - 64.0 kHz
Dot clock:
25 MHz - 108 MHz
<BT-L1500P/1500E>
Vertical Frequency:
60.0 Hz - 75.0 Hz
Horizontal frequency:
31.5 kHz - 60.0 kHz
Dot clock:
25 MHz - 83.5 MHz
HD/VD signal level:
TTL level
Audio input:
SDI IN (HD/SD) terminals:
EMBEDDED AUDIO
HD - SDI:
SMPTE299M compliant
Sampling rate: 48 kHz,
synchronous/asynchronous,
8 ch
SD - SDI:
SMPTE272M compliant
Sampling rate: 48 kHz,
synchronous, 4 ch
HDMI terminal:
EMBEDDED AUDIO
AUDIO IN terminal (Analog audio input):
Pin jack x 2 (stereo)
Input level 0.5 Vrms
Speaker output:
0.5 W + 0.5 W
Headphone output:
Stereo minijack
M3 x 1, 32
Ω
adjustable level
GPI terminal:
D-SUB, 9-pin x 1
<BT-L2150P/2150E>
AC:
Power supply
100 V - 240 V, 50/60 Hz
Current consumption
0.60 A - 0.30 A
<BT-L1500P/1500E>
AC:
Power supply
100 V - 240 V, 50/60 Hz
Current consumption
0.50 A - 0.25 A
indicates safety information.
Inrush current, measured according to European stan-
dard EN55103-1: 11.0 A