Panasonic BT-L2150PJ Operating Instructions - Page 22

Main Menu (continued) ■ PC The menus shown below appear when PC is selected as the input signal. Underlined values indicate factory defaults. Sub menu Setting AUTO SETUP*1 Description Automatically adjusts the screen when PC is selected as the input signal. A separate screen opens. Select YES to perform AUTO SETUP. H-POSITION*2 0 to 60 Adjusts horizontal image display position. (Factory default setting: 30) V-POSITION*2 0 to 60 Adjusts vertical image display position. (Factory default setting: 30) PHASE*2 0 to 31 Adjusts the clock phase in 1/32 clock period increments. (Factory default setting: 16) CLOCK*2 700 - 2200 700 - 1800 (Factory preset settings:*3) Adjusts the sampling clock in dot units. WXGA/XGA XGA WXGA Switches between WXGA and XGA. RESET Returns H-POSITION, V-POSITION, PHASE and CLOCK settings in the PC input compliant format to their factory defaults. *1 "EXECUTING" is displayed during AUTO SETUP and "COMPLETE" appears when setup completes. "INCOMPLETE" is displayed if setup could not be completed. AUTO SETUP may not provide adequate automatic screen adjustments in all cases. Use H-POSITION, V- POSITION, PHASE and CLOCK to adjust. *2 You can make adjustments for each input format *3 Factory default values of CLOCK Format CLOCK 640 x 400 (70 Hz) 800 640 x 480 (60 Hz) 800 640 x 480 (75 Hz) 840 800 x 600 (60 Hz) 1056 800 x 600 (75 Hz) 1056 1024 x 768 (60 Hz) 1344 *4 Used for BT-L2150P/2150E Format 1024 x 768 (70 Hz) 1024 x 768 (75 Hz) 1280 x 768 (60 Hz) 1280 x 800 (60 Hz) 1280 x 1024 (60 Hz) CLOCK 1328 1312 1664 1680 1688*4 22