Panasonic BT-L2150PJ Operating Instructions - Page 21

Main Menu (continued) SYSTEM CONFIG Underlined values indicate factory defaults. Sub menu Setting Description CONT./BACK. BACKLIGHT CONTRAST Selects function to be assigned to the CONT./B.LIGHT front panel buttons. Adjusts the B.LIGHT (backlight). Adjusts the CONT. (contrast). BACKLIGHT 0 to 60 Adjusts LCD backlight brightness. Adjust as required by ambient conditions. STATUS DISPLAY CONTINUE 3SEC OFF OFF SETUP LOAD COLOR SPACE FACTORY SMPTE-C*1 EBU*2 ITU-709*3 Sets display state for input signal status (on-screen menu). Displayed at all times. Displayed for approximately 3 seconds after a status change. Not displayed. Loads saved factory defaults (FACTORY). Sets the studio standard color shade. POWER DOWN OFF Selects whether monitor power shuts off (POWER DOWN) when no ON operation has taken place for a preset period of time and no input signal is present. Disables POWER DOWN. Enables POWER DOWN. *1 Factory default setting for the BT-L2150P/1500P. *2 Factory default setting for the BT-L2150E/1500E. *3 ITU-709 is an ITU-R BT.709 standard. GPI Enables and disables all GPI functions enabled by GPI CONTROL. Underlined values indicate factory defaults. Sub menu Setting Description GPI CONTROL DISABLE ENABLE Enables and disables GPI functions Disabled Enabled INPUT SELECT Sub menu NTSC SETUP Setting 75 00 PC Underlined values indicate factory defaults. Description Selects NTSC setup level. Select this function when using 7.5 % setup signals. (Adjusts the interior of the monitor to the 7.5 % setup level to suit the black level) Select this when there is no setup signal. Performs analog PC settings.(PCJ page 22) 21