Panasonic CF-Y4HWPZZBM Notebook Computer - Page 25

Using the Touch Pad Use the touch pad to move the cursor on the screen and perform computer operations. A. Work Surface (touch pad) B. Left Button C. Right Button Function Moving the Cursor Operation Move the tip of your finger lightly over the work surface. Tapping/Clicking Getting Started Double-Tapping/ Double-Clicking tapping or clicking z A right-click: Can only be performed by clicking the right button. Dragging double-tapping or double-clicking Vertical Scroll / Horizontal Scroll Two quick taps, but on the second tap leave your finger down (applying pressure) and move it on the work surface. or While holding down the button, move your finger on the work surface. Trace a circle around the touch pad. A setting is required before using the horizontal scrolling function. (Î "Using the Touch Pad" in onscreen Reference Manual) NOTE z You can change the speed of the double-click or the operations of mouse buttons using [Mouse Properties] screen. • To display [Mouse Properties]: Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse]. z When using the touch pad, keep the following in mind. • By design the touch pad is to be used with a finger tip only. Do not place any object or press down forcefully with sharp-pointed objects, i.e. finger nails, pencils, or pens on the work surface. • Try to avoid having any harmful substances, such as oil, come in contact with the touch pad. The cursor may not work properly in such cases. ‹When the cursor doesn't move the way you want it to z Sensitivity when touching the touch pad can be adjusted. (Î "Using the Touch Pad" in onscreen Reference Manual) z When an external mouse is connected and the cursor does not operate properly: In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you want to use the touch pad again, return the setting to [Enable]. (Î page 31) 25