Panasonic DC-ZS70 Advanced Operating Manual - Page 130

4K Photo and Drive Settings Selecting a Drive Mode Burst function ■■Setting [Burst Rate] After selecting [Burst] and pressing in step 2 (→129), select the burst rate with , and press [MENU/SET] Speed (pictures/sec.) [AFS] [AFF] / [AFC] Live View during burst recording Number of With RAW files recordable pictures*1 Without RAW files [H] (High speed) 10 5 None 10 31 [M] (Middle speed) 5 5 Available 10 100 or more [L] (Low speed) 2 2 Available 10 100 or more *1 The number of burst pictures is limited by the picture-taking conditions and the type and/or status of the card used. Pictures can be taken until the card becomes full. However, the burst speed will become slower halfway through the recording. The exact time when the slower burst speed will start depends on the settings of the aspect ratio, picture size, and quality as well as the type of card used. Focusing in burst mode Focusing varies depending on the [AFS/AFF/AFC] in [Rec] menu (→91) and the setting of [Focus/ Release Priority] (→188) in the [Custom] menu. [AFS/AFF/AFC] [AFS] [AFF] / [AFC]*2 [Focus/Release Priority] [FOCUS] [RELEASE] [FOCUS] [RELEASE] Focus At the first picture Normal focusing*3 Predicted focusing*4 *2 Focus is fixed in the first picture when dark subjects are recorded. *3 Since the camera records a burst of pictures while it adjusts the focus, the burst speed may be slower. *4 The camera predicts the focus within a possible range by giving higher priority to the burst speed. 130 DVQP1285