Panasonic DC-ZS70 Advanced Operating Manual - Page 66
Taking pictures after automatically setting the aperture value and shutter speed (Program AE Mode)
View all Panasonic DC-ZS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Recording mode Taking pictures after automatically setting the aperture value and shutter speed (Program AE Mode) Recording mode: Take pictures using automatic aperture values and shutter speed settings in accordance with the brightness of a subject. 1 Set mode dial to [ ] 2 Press the shutter button halfway 60p ••If the aperture value and shutter speed flash red, you do not have the correct exposure. 3 While the numeric values are displayed (approximately 10 seconds), rotate the control dial to change the values using Program Shift 250 125 60 30 15 4.0 5.6 8.0 Program Shift indication Aperture value Shutter speed ••The operation can also be performed by rotating the control ring. (→38) ••To cancel Program Shift, either turn off the camera or rotate the control dial until the Program Shift indication turns off. ••Program Shift can easily be canceled by setting a function button to [One Push AE]. (→71) About Program Shift The function for maintaining the same exposure (brightness) while changing the aperture value and shutter speed combination is called "Program Shift". You can use "Program Shift" to take pictures by adjusting the aperture value and shutter speed even in Program AE Mode. ●●Program Shift cannot be used in the following cases: •• When recording 4K photos •• When recording using [Post Focus] •• When ISO sensitivity is set to [ ] 66 DVQP1285