Panasonic DC-ZS70 Advanced Operating Manual - Page 190
Peaking], Histogram
View all Panasonic DC-ZS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Using Menu Functions Menu list → [Custom] [Peaking] When you perform Manual Focus operation, this function automatically adds color to the portions of the image that are in Focus (portions on the screen with clear outlines). ●●When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you to achieve a more precise focus. ●●Changing the [Detect Level] setting also changes the [Display Color] setting as follows. [Detect Level] [HIGH] [LOW] [ ] (Light blue) [ ] (Blue) [ ] (Yellow) [ ] (Orange) [Display Color] [ ] (Yellow Green) [ ] (Green) [ ] (Pink) [ ] (Red) [ ] (White) [ ] (Gray) ●●Each time [ ] in [ ] is touched, the setting is switched in order of [ [LOW]) → [ ] ([Detect Level]: [HIGH]) → [OFF]. ●●This function is not available in the following case: •• [Rough Monochrome] (Creative Control Mode) ] ([Detect Level]: [Histogram] Enabling/disabling the histogram display. When set to [ON], you can move the display position of the histogram by pressing . ••Direct touch operation is also possible from the recording screen. Displays distribution of brightness in picture - e.g. if the graph peaks at the right, this means there are several bright areas in the picture. A peak in the center represents correct brightness (correct exposure). This can be used as a reference for exposure correction, etc. (Example) Dark ← OK → Bright ●●When the histogram is not the same as that of the recorded picture under the following conditions, histogram will be displayed in orange: •• During Exposure Compensation. •• When the flash fires. •• When the correct exposure is not achieved, such as when the lighting is low. 190 DVQP1285