Panasonic DC-ZS70 Advanced Operating Manual - Page 261
[Wi-Fi Setup], Setup, Wi-Fi
View all Panasonic DC-ZS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Wi-Fi [Wi-Fi Setup] Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi. → [Setup] → [Wi-Fi] → [Wi-Fi Setup] [Wi-Fi Password] You can improve security by enabling password entry for a direct connection to a smartphone. [ON]: Connects the camera and a smartphone using an SSID and password. (→230) [OFF]: C onnects the camera and a smartphone using an SSID. (→229) •• When [ON] is selected, you can also set up a connection by scanning a QR code. (→230) [LUMIX CLUB] Acquires or changes the "LUMIX CLUB" login ID. (→251) [PC Connection] You can set the workgroup. You must connect to the same workgroup as the destination computer when sending pictures to the computer. (The default is set to "WORKGROUP") [Change Workgroup Name]: Enter the workgroup of the connecting computer. [Restore to Default]: Returns settings to default settings. •• For details on how to enter characters, refer to "Entering Text" (→52) •• To use with a computer of the standard settings, you do not have to change the workgroup. [Device Name] You can change the name (SSID) of this unit. Press [DISP.] button Enter the desired device name (Up to 32 characters can be entered) •• For details on how to enter characters, refer to "Entering Text" (→52) [Wi-Fi Function Lock] To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Cancel] •• For details on how to enter characters, refer to "Entering Text" (→52) •• Make a copy of password. If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however other settings will also be reset. (excluding [LUMIX CLUB]) [Network Address] Displays the MAC address and IP address of this unit. •• A "MAC Address" is a unique address that is used to identify network equipment. •• "IP address" refers to a number that identifies a PC connected to a network such as the Internet. Usually, the addresses for homes are automatically assigned by the DHCP function such as a wireless access point. (Example: 192.168.0.87) [Approved Regulations] The authentication number is displayed. 261 DVQP1285