Panasonic DC-ZS70 Advanced Operating Manual - Page 257

Wi-Fi 1 Select the wireless access point you are connecting to •• Pressing [DISP.] button will search for a wireless access point again. •• If no wireless access point is found, refer to "When connecting with [Manual Input]" (→257). About connections 2 (If network authentication is encrypted) Enter the encryption key •• For details on how to enter characters, refer to "Entering Text" (→52) ■■When connecting with [Manual Input] On the screen of step 1 of "If you are not sure about the WPS compatibility (connecting by [From List])", select [Manual Input] Enter the SSID of the wireless access point you are connecting to, then select [Set] •• For details on how to enter characters, refer to "Entering Text" (→52) Select the network authentication type •• For information on network authentication, see the instruction manual of the wireless access point. Select the encryption type •• The type of settings that can be changed may vary depending on the details of network authentication settings. Network authentication type Encryption types that can be set [WPA2-PSK] / [WPA-PSK] [TKIP] / [AES] [Common Key] [WEP] [Open] [No Encryption] / [WEP] (When an option other than [No Encryption] is selected) Enter the encryption key ●●Check the wireless access points instruction manual and settings when saving a wireless access point. ●●If no connection can be established, the wireless access point's radio waves may be too weak. Refer to "Message displays" (→284) and "Q&A Troubleshooting" (→290) for details. ●●Transmission speed may decrease, or may not be usable depending on the environment it is used in. 257 DVQP1285