Panasonic FV-10VS1 Installation Instructions - Page 12
accessible area
View all Panasonic FV-10VS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
INSTALLATION V ( WOODEN HEADER ) 1. Before installation, secure the fan body to adaptor by using thumb screw. (Fig. 1 of page 6) Joist 2. Install header between joists by using nails or screws. 3. Install the ventilating fan and secure it by using long screws (ST4.2X20). (Fig. 19, Fig. 20) 4. Follow step 5 to 9 of installation I (page 7, page 8) to complete the installation work. ()I (2/s Fan body Unit: inches (mm) Junction box Header ((3375) Joist Adaptor Fig. 19 Circular duct ba 8 i I 8 1 6 Longscrews (ST4.2X20) Junction box Conduit Wire nut Lead wires Green wires Fig. 20 INSTALLATION VI ( IN EXISTING CONSTRUCTION ) 1. Installation in existing construction. Installing the ventilating fan in an existing building requires an accessible area (attic or crawl space) above the planned installation location or existing ducting and wiring. (1) To install the ventilating fan, follow the procedures described in Installation II. Take the following precautions before installation. CAUTION: Check area above planning installation location to be sure that: 1. Duct work can be done and that area is sufficient for proper ventilation. 2. Wiring can be run to planned location. 3. No wiring or other obstructions shall interfere with installation. (2) Inspect duct work and wiring before proceeding with installation. (3) Plan suitable location for ventilating fan. (next to ceiling joist) (4) Before installation, provide inspection and maintenance access at a location that will not interfere with installation work shown in installation II. (5) First, remove ceiling section according to Fig. 6 of page 8. (6) Install ventilating fan. 2. Installation from accessible area above fan location. (1) Inspect duct work and wiring before proceeding with installation. (2) Remove ceiling section according to Fig. 6 of page 8. (3) Install ventilating fan. 12