Panasonic FV-10VS1 Installation Instructions - Page 8
the suspension
View all Panasonic FV-10VS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INSTALLATION I (JOIST MOUNTING-I) CONTINUED 8. Finish ceiling work. Ceiling hole should be aligned with the edge of the flange. (Fig. 6) 7ze 12 4-4°100(11"••• -410. 9. Insert mounting springs into slots as shown and mount grille to fan body. (Fig. 7) Ceiling Unit: inches (mm) Slot Fig. 6 Mounting spring Ceiling Grille INSTALLATION II (JOIST MOUNTING-II) 1. Disconnect plug connector from receptacle and remove adaptor from fan body before starting installation. Adaptor 2. Insert the suspension bracket into the adaptor and secure it to joists by using long screws (ST4.2X20). (Fig. 8) CAUTION: Ensure that distance B is no more than 1/2 inch (13 mm). 2 Long screws (ST4.2X20) Joists Fig. 7 If spacing D between joists is 21 1/4 to 23 1/2 inches, connect suspension bracket It and III (C4 mark to C4 mark) according to page 6. Select the suspension bracket according to spacing D as shown below. Spacing D between Joists inches (mm) 13 1/4-15 1/2 ( 336-394) suspension bracket suspension bracket I 16 1/2-18 3/4 ( 419-480 ) suspension bracket III 21 1/4-23 1/2 ( 540-597 ) suspension bracket II & III 3. Follow step 5 to 7 of the Installation I (page 7) to complete the duct work and wiring. 4. Insert the suspension bracket into fan body (refering to step 2 of Installation I, page 6). 2 Long screws (ST4.2X20) Adaptor Suspension bracket 13 1/4-15 1/2 ( 336-394 ) 16 1/2-18 3/4 (419-480 ) 21 1/4-23 1/2 ( 540-597 ) III no more than 1/2 (13) Unit: inches (mm) 1\ Fig. 8 8