Panasonic FV-10VS1 Installation Instructions - Page 7

INSTALLATION I (JOIST MOUNTING-I) CONTINUED 3. Install the suspension bracket and the flange of fan body to joists by using long screws (ST4.2X20) according to Fig. 3. Joist Fan body 4 Long screws (ST4.2X20) Fig. 3-1 A = 10 1/4-12 inches Joist 4. Install the suspension bracket to joists by using long screws (ST4.2X20) and secure it to the fan body by using screw II (ST4.2X10). (Fig. 4) 5. Remove junction box cover and secure conduit or stress relief to junction box knock-out hole. (Fig. 5) 6. Refer to wiring diagram (page 5). Using wire nuts, connect house power wires to ventilating fan wires: black to black; white to white; green to green; Replace the junction box cover. (Fig. 5) CAUTION: Mount junction box cover carefully so that lead wires are not pinched. 7.FV-05VS1 /FV-08VS1: install a circular duct and secure it with duct tape. FV-10VS1: squeeze the circular duct to fit the adaptor, then slipped onto the adaptor and secure it with duct tape. Squeeze 7 Fan body 2 Long screws (ST4.2X20) Fig. 3-2 Joist 2 Long screws (ST4.2X20) 0 0 screw II (ST4.2X10) Fig. 4 Circular duct Conduit Junction box cover Joist Duct tape a a Condui Junction box Wire nut Lead wires Green wires Fig. 5