Panasonic FV-10VS1 Installation Instructions - Page 9
direction.
View all Panasonic FV-10VS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLATION II ( JOIST MOUNTING-II ) CONTINUED 5. Insert the fan body into joists. (Fig. 9) IMPORTANT: Make sure that adaptor claws are properly inserted into body slots. 6. Secure the fan body to adaptor by using thumb screw and plug connector to receptacle. (Fig. 10) 7. Secure the suspension bracket to joists by using long screws (ST4.2X20) and secure it to fan body by using screw II (ST4.2X10) in vertical direction. (Fig. 11) 8. Follow step 8 to 9 of Installation I (page 8) to complete the installation work. When mounting body and blower separately 1. Loosen 4 screws (but do not remove them from blower). (Fig. 12-1) 4 Screws 0 0 CI Adaptor 2. Remove blower section. (Fig. 12-2) Fig.12-1 3. Remove adaptor from fan body and secure it to joists as in Fig. 8 of page 8. Blower 4. Insert fan body (without blower section) into joists. (Fig. 9) Fan body 5. Secure the adaptor to fan body by using thumb screw. (Fig. 10) Fan body O Fig.12-2 6. Secure the fan body to joists by using long screw (ST4.2X20). (Fig. 11) 7. Insert the blower into the fan body. (Fig. 12-3) Fig.12-3 8. Secure the blower. (Fig. 12-4) and plug connector to receptacle. (Fig. 10) I I Circular duct Joist Conduit Junction box cover Fan body Adaptor claws Fig. 9 Ceiling Thumb screw Plug connector I Receptacle I Fig. 10 screw II(ST4.2X10) 4 Screws Screw driver Fig.12-4 2 Long screws (ST4.2X20) Joist 9 9 Fig. 11