Panasonic HDCSX5P Hd Video Camera - Multi Language - Page 67
Built-in flash, Press the PHOTO SHOT button.
View all Panasonic HDCSX5P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Recording Ø10: Starts recording after 10 seconds Ø2: Starts recording after 2 seconds 3 Press the PHOTO SHOT button. A still picture is recorded after the [Ø10] or [Ø2] display and the recording lamp flashes for the time which has been set. ≥ After recording, the self-timer is canceled. ≥ If you press the PHOTO SHOT button halfway and then fully in auto focus mode, the subject is focused when the button is pressed halfway. ≥ When you press the PHOTO SHOT button fully in auto focus mode, the subject is focused just before recording. Built-in flash PHOTO Use the built-in flash in order to record still pictures in dark places. ¬ Rotate the mode dial to select or . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. To stop the timer midway through Press the MENU button. (The self-timer setting is canceled.) ≥ The self-timer is canceled if the power is turned off or the mode dial is operated. ≥ The self-timer standby mode is canceled when you press the recording start/stop button to start motion picture recording. Even if you press the recording start/stop button while the self-timer is counting down, motion picture recording is not possible. ≥ Depending on the time taken to bring the subject into focus, the recording may take longer than set to start. ≥ Setting the self-timer to [Ø2] is a good way to prevent image shake when the PHOTO SHOT button is pressed while using a tripod etc. 2 Move the cursor button left to select [ß]. ≥ Each time the cursor button is pressed left, the indication changes by one setting in the following order: [FLASH ON] > [FLASH AUTO] > [FLASH OFF] ≥ When the PHOTO SHOT button is pressed halfway, the flash indicator will appear in the bottom left corner of the screen. [FLASH ON]: ß [FLASH AUTO]:ßA [FLASH OFF]: ≥ When [FLASH AUTO] is set, the ambient brightness is automatically detected, and the flash will activate only when necessary. (If the flash is not necessary, the [ßA] indicator will not appear when the PHOTO SHOT button is pressed halfway.) ≥ This function's default setting is [FLASH AUTO]. 3 Press the PHOTO SHOT button. The flash is activated and the picture will be recorded. 67 VQT1J42