Panasonic HDCSX5P Hd Video Camera - Multi Language - Page 71

Recording Wind noise reduction function This is for reducing the wind noise coming into the microphone when recording. ̝̙ ̝̙ ̝̙ ̝̙ VIDEO ¬ Rotate the mode dial to select or . Press the MENU button, then select [VIDEO] (HD mode) or [ADVANCED] (STD mode) # [WIND CUT] # [ON] and press the cursor button. MENU Microphone level This is for adjusting the microphone input level. ̝̙ ̝̙ ̝̙ ̝̙ VIDEO When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ¬ Rotate the mode dial to select or . 1 Press the MENU button, then select [VIDEO] > [MIC LEVEL] > [SETrAGC] or [SET] and press the cursor button. MENU To cancel the wind noise reduction function Press the MENU button, then select [VIDEO] (HD mode) or [ADVANCED] (STD mode) # [WIND CUT] # [OFF] and press the cursor button. ≥ This function's default setting is [ON]. ≥ The wind noise reduction depends on the wind strength. (The stereo effect may be reduced if this function is activated in strong winds. However, the stereo effect is automatically restored when then the wind weakens.) AGC: Auto Gain Control [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETrAGC]: The desired recording level can be set. AGC will also be activated to reduce the amount of sound distortion. [SET]: AGC is not activated and so natural recording can be performed. 2 Move the cursor button left or right to adjust the microphone input level. A Left B Right C Microphone input level 71 VQT1J42