Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 32
Initial setting, Caller ID edit, Using the Caller List, Caller ID Number Auto Edit Feature
UPC - 037988473649
View all Panasonic KX-TG5110M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Using the Caller List Caller ID Number Auto Edit Feature Handset Base Unit There are 3 patterns of phone number [(a), (b), and (c), p. 31]. This feature allows your phone to automatically edit an in-coming Caller ID number into a pattern of your choice, and display the Caller ID number with that pattern automatically. After this feature is activated, Caller ID numbers coming from specific area codes (201, for example), from which the Caller ID numbers have been chosen to follow the desired pattern (7-digit pattern, for example), will be automatically edited from other patterns (11-digit pattern, for example) into the same pattern you have previously selected (which is 7-digit pattern, in this example). Up to 4 area codes can be designated for this feature for pattern (a), (b), and (c) (p. 31). The Caller ID numbers can be edited automatically on the handset and the base unit separately. Changes made on the handset cannot be used to make a call with the base unit and vice versa. To activate this feature, you must (1) set this feature to ON, and (2) make an out-going call from Caller List (p. 31) with a number which has one of the 3 patterns that you have edited with specific area codes, and that you prefer to be followed by future Caller ID numbers, so that in the future all the Caller ID numbers coming from the same area code will be displayed in the same pattern. The Caller ID number Auto Edit feature is preset at the factory to ON. • If a call does not go through, the phone number you dialed may have an incorrect pattern. Please edit the phone number with another pattern (p. 31). For example, if you move to another area, you may need to turn this feature to OFF to erase previously edited area codes. Then, if still necessary, you may activate this feature again. You can turn on/off the feature on the handset and the base unit separately. 1 Handset: Press [CONF/FUNCTION]. Base unit: Press [FUNCTION/EDIT]. 2 Scroll to "Initial setting" by pressing [ ] or [ ], then press [ ]. Initial setting 3 Scroll to "Caller ID edit" by pressing [ ] or [ ], then press [ ]. Caller ID edit 4 Select "Off" or "On" by pressing [ ] or [ ]. Auto edit :On M M M 5 Handset: Press the soft key ( SAVE ), then press [OFF]. Base unit: Press [ ] (Save), then press [STOP]. • When the feature is set to OFF, the unit will still be able to display Caller ID, but the in-coming Caller ID number will not be edited by pattern or by area codes. 32