Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 56

Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when: - "Memory full" is heard. - " ALL MAILBOX FULL " is displayed on the base unit. - ANSWER ON indicator flashes rapidly (only when the Answering System is on). Erase some, or all, of the messages in a mailbox. We recommend you erase unnecessary messages after each playback. Erasing a specific message Base Unit Press [ERASE] while the message you want to erase is being played. • A short beep will sound and the unit will continue to play the next message. Handset Press [ ][4] while the message you want to erase is being played. • A short beep will sound and the unit will continue to play the next message. Erasing all messages in the mailbox Base Unit 1 Press [ERASE] while the base unit is not being used. • "To erase all messages, please select Mailbox" is heard. 2 Within 10 seconds, press the MAILBOX button ([MAILBOX 1], [MAILBOX 2] or [MAILBOX 3]). • If Mailbox 2 or 3 has a password, enter it (p. 51). • A long beep will sound and "Mailbox (No.)" and "No messages" will be heard. Select MAILBOX to erase all messages Ex. Mailbox 3 is selected. Mailbox3 All erase 3 MAILBOX Handset 1. Press the soft key ( PLAY ). 2. Press the soft key ( BOX1, BOX2 or BOX3 ). • If Mailbox 2 or 3 has a password, enter it (p. 51). 3. Press [ ][5] to erase all messages in the mailbox. • A long beep will sound and "Mailbox (No.)" and "No messages" will be heard. • To end remote operation, press [OFF]. 56