Panasonic KX-TG5110M 5.8ghz Phone W/tam - Page 68
If The Following Appear On Your Display
UPC - 037988473649
View all Panasonic KX-TG5110M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
If the Following Appear on Your Display... If the unit detects a problem, one of the following messages will be displayed on the handset or the base unit. Error beeps or a busy tone will sound. Display message Recharge battery (handset only) Charge for 6 HRS (handset only) No link to base. Walk closer to base and try again. (handset only) Please lift up and try again. (handset only) Busy Invalid Error!! Phone book full Cause & Remedy • The battery needs to be charged. Recharge the battery (p. 13). • The battery has been discharged. The handset will not work. Charge the battery fully (p. 13). • The handset has lost communication with the base unit. Walk closer to the base unit, and try again. • Plug in the base unit's AC adaptor. • Raise the base unit antennas. • A handset button was pressed while the handset was on the base unit or the charger. Lift the handset and press the button again. • The called unit is in use. • The Privacy mode is on for the call you tried to join (p. 45). • The unit you tried to send phone book items to is in use. • The handset you are calling is too far from the base unit. • The called handset has not been registered to the base unit. • You selected your own extension number. • You pressed [9] instead of entering an extension number. Enter the extension number (0 to 8) to call. • When you tried to register or deregister the handset, the handset and the base unit could not link for some reason, such as interference from other electrical appliances. Move the handset and the base unit away from electrical appliances and try again. • If more than one handset is in use, you may not be able to register/deregister. Try again later. • Another unit tried to send phone book items to you but the transfer has been stopped (p. 38, 39). • When you tried to store an item in the phone book, the phone book memory is full. Press [OFF] on the handset or [STOP] on the base unit to exit the programming mode. To erase other items from the phone book, see page 37. 68