Panasonic KX-TS105BK Operating Instructions - Page 12

Speed, Dialer

Page 12 highlights

Speed Dialer Storing Phone Numbers You can store up to 10 phone numbers in memory. The dialing buttons (0 to 0) function as memory stations. Do not press any memory stations before storing to prevent misoperation. Make sure that a call is not put on hold. 1 Press (PROGRAM) •The MUTE indicator flashes. PROGRAM) 2 Enter a phone number, up to 22 digits. •If you enter a wrong number, press (PROGRAM) and start again from step 1. O 00o4-) (atS o 3 Press AUTO/LOWER) Memory Station AUTO/LOWER PAUSE 4 Press a memory station number (0 to 0). Numbers BP-PHONE/HEADSET) •A long beep sounds. and Indicator •The MUTE indicator light goes out. *The unit will return to the standby mode. •If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1. •You can exit the programming mode in step 1 and 2 by pressing (PROGRAM) •If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (p. 17). 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Speed
Dialer
Storing
Phone
Numbers
You
can
store
up
to
10
phone
numbers
in
memory.
The
dialing
buttons
(0
to
0)
function
as
memory
stations.
Do
not
press
any
memory
stations
before
storing
to
prevent
misoperation.
Make
sure
that
a
call
is
not
put
on
hold.
1
2
3
4
Press
(PROGRAM)
•The
MUTE
indicator
flashes.
Enter
a
phone
number,
up
to
22
digits.
•If
you
enter
a
wrong
number,
press
and
start
again
from
step
1.
(PROGRAM)
Press
AUTO/LOWER)
Press
a
memory
station
number
(0
to
0).
•A
long
beep
sounds.
•The
MUTE
indicator
light
goes
out.
*The
unit
will
return
to
the
standby
mode.
•If
3
beeps
sound,
the
number
entered
in
step
2
may
be
over
22
digits.
Lift
the
handset
and
place
it
on
the
cradle
to
return
to
the
standby
mode,
and
start
again
from
step
1.
PROGRAM)
00
O
4-)
(
atS
o
o
Memory
Station
Numbers
AUTO/LOWER
PAUSE
BP-PHONE/HEADSET)
and
Indicator
•You
can
exit
the
programming
mode
in
step
1
and
2
by
pressing
•If
a
pause
is
required
for
dialing,
press
(PAUSE)
where
needed.
Pressing
counts
as
one
digit
(p.
17).
(PAUSE)
(PROGRAM)
12