Panasonic KX-TS3282B Multi-line Phone - Page 65

Problem Cause and Remedy You cannot store a name and phone number in memory. • Programming is not possible when the handset is off the cradle or the SP-PHONE/ HEADSET indicator lights. • Do not pause for over 60 seconds while storing. • Do not enter a phone number more than 22 digits long. • When using the Dial Lock (p. 57) or Call Restriction feature (p. 58), you cannot store a phone number in the one-touch auto dial buttons ([M1] to [M3]). • If "Directory full" is displayed, erase other stored items from the directory (p. 43). While programming or searching, the unit starts to ring and stops the program/ search. • To answer the call, lift the handset or press [SP-PHONE/HEADSET]. Start again from the beginning after hanging up. The unit does not display the caller's name and/or phone number. • You need to subscribe to a Caller ID service. • Other telephone equipment may be interfering with your phone. Disconnect it and try again. • Other electrical appliances connected to the same outlet may be interfering with the Caller ID information. • Telephone line noise may be interfering with the Caller ID information. Consult your telephone company. • The caller requested not to send his/her information. See page 29. • If a call is being transferred to you, the caller information will not be displayed. The display exits the • Do not pause for over 60 seconds while Caller List. searching. You cannot redial by pressing [REDIAL]. • If the last number dialed was more than 32 digits long, the number will not be redialed correctly. Useful Information For assistance, please call: 1-800-211-PANA(7262) 65