Panasonic PV GS15 Digital Video Camera - Page 18
INSERTING / REMOVING A CARD, Inserting/removing the cassette
UPC - 037988977734
View all Panasonic PV GS15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Before using ª When the cassette holder does not come out ≥Close the cassette cover completely, and then open it again completely. ≥Check if the battery has run down. ª When the cassette holder cannot be housed ≥Set the [OFF/ON] switch to [OFF], then to [ON] again. ≥Check if the battery has run down. ª Inserting/removing the cassette ≥When the cassette holder is in motion, do not touch anything except the [PUSH] mark. ≥When inserting a previously recorded cassette, use the blank search function to find the position where you want to continue recording. If you overwrite-record on a previously recorded cassette, be sure to find the position where you want to continue recording. ≥Close the cassette cover tightly. ≥When closing the cassette cover, do not get anything, such as a cable, caught in the cover. ª Accidental erasure prevention If the accidental erasure prevention slider 1 of a cassette is opened (slide in the direction of the [SAVE] arrow), the cassette cannot be recorded. When recording, close the accidental erasure prevention slider of the cassette (slide in the direction of the [REC] arrow). 1 R E C SAVE Inserting/removing a card Before inserting/removing a card, be sure to turn the power [OFF]. ≥If the card is inserted or removed with the power turned on, this Camcorder may malfunction or the data recorded on the card may be lost. 1 Open the LCD monitor and then open the card slot cover. 2 Insert/remove the card into/from the card slot. 1 ≥When inserting a card, face the label side 1 towards you and push it straight in with one stroke as far as it goes. ≥When removing the card, open the card slot cover and press the center of the card and then pull it straight out. 3 Securely close the card slot cover. ª Concerning the card ≥Do not touch the terminals on the back of the card. ≥Do not format the card with another Camcorder or any personal computer. This operation may make the card unusable. ≥Electrical noise, static electricity, or failure of the Camcorder or the card may damage or erase the data stored on the card. We recommend saving important data on a personal computer by using a USB cable, PC card adaptor, or USB reader/writer. 18 LSQT0861