Panasonic PV GS15 Digital Video Camera - Page 32
BLACKLIGHT COMPENSATION FUNCTION, To cancel the quick start when the, power is [OFF]
UPC - 037988977734
View all Panasonic PV GS15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Record mode Quick start This Camcorder will be put into standby in approx. 1.7 seconds after the power is turned on. ≥This is only activated in the following cases. ≥A tape or a card is inserted, while the Tape Recording Mode is set. ≥A card is inserted, while the Card Recording Mode is set. 1 Press the [QUICK START] button. QUICK START ≥Since about half the power of normal recording is used in quick start standby, using quick start reduces the time during which pictures can be recorded. Backlight compensation function This protects a backlit subject from being darkened. ≥Set to Tape/Card Recording Mode. 1 Press the joystick until the icon 1 appears. 2 Move the joystick right to select the backlight compensation icon [ ]. ≥The quick start recording lamp lights up. (Press the button again to cancel it.) 2 Set the [OFF/ON] switch to [OFF]. OFF ON POWER ≥The quick start is now ready. 3 Set the [OFF/ON] switch to [ON]. ≥This Camcorder will be put into a recording pause in approx. 1.7 seconds after it is turned on. ª To cancel the quick start when the power is [OFF] Press and hold the [QUICK START] button for approx. 2 seconds. The lamp will go off and the Camcorder will be completely turned off. ≥If the standby continues for approx. 30 minutes, then the lamp will go off and the Camcorder will be completely turned off. ≥When you rotate the mode dial or remove the battery, the quick start recording lamp is turned off and the quick start mode is canceled. If the Camcorder is turned on and the Tape/Card Recording Mode is set though, the lamp turns on and the quick start mode is restored. ≥When the Camcorder is quick-started with the white balance on automatic, it may take some time until the white balance is adjusted if the scene being recorded has a light source different from the scene last recorded. (When the MagicPix function is used, however, the white balance of the scene last recorded is retained.) ≥The zoom magnification differs from when it is in the quick start standby mode and when the recording starts. 1 ª ≥The image on the screen will become brighter. ª To return to normal recording Select the [ ] icon again. ≥If you operate the [OFF/ON] switch or the mode dial, the backlight compensation is canceled. 32 LSQT0861