Panasonic PV GS15 Digital Video Camera - Page 28
Recording On A Tape, Recording Still Pictures On A Card While Recording Image Onto A Tape - dv cable
UPC - 037988977734
View all Panasonic PV GS15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Record mode Recording on a tape ≥Open the lens cover. (-19-) (When the Camcorder is turned on with the lens cover closed, the automatic white balance adjustment may not function properly. Please turn the Camcorder on after opening the lens cover.) ≥Set to Tape Recording Mode. PC 1 Press the recording start/stop button to start recording. 2 Press the recording start/stop button again to pause recording. ; ≥For details on the recording time on a tape, refer to -17-. ≥Carry out a recording check (-29-) to verify that the image is recorded properly. ≥In order to find the unrecorded section, carry out the blank search (-29-) . ª On-screen display in the tape recording mode 1) ęç÷āú÷ 2) 3)¢ ø÷÷ 4)¢ 5)¢ ¢These indications are displayed only when the card is inserted. 1) Recording time elapsed 2) Remaining tape indication 3) Still picture size 4) Number of recordable still pictures (When no picture can be recorded, this indication will flash in red.) 5) Quality of still pictures ª Concerning the remaining tape time indication on the screen ≥The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.) ≥During a 15-second or shorter recording, the remaining tape time indication may not be displayed or the remaining tape time may not be displayed correctly. ≥In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time. ª [POWER SAVE] [OFF]: When 5 minutes passes without any operation, the standby mode will be automatically set. In the standby mode, [;] blinks and it takes more time than usual to start recording after you press the recording start/stop button. [5 MINUTES]: When 5 minutes passes without any operation, the Camcorder automatically turns off to protect the tape or to prevent the battery from running down. When you want to use the Camcorder, turn it on again. ≥The Camcorder cannot be automatically turned off when you connect the USB connection cable or the DV cable with the Camcorder or when the Camcorder is in the PC mode. Recording still pictures on a card while recording image onto a tape You can record still pictures while recording image onto a tape. ≥Set to Tape Recording Mode. 1 Press the [PHOTO SHOT] button fully while recording image onto a tape. PHOTO SHOT ≥For the number of still pictures to be recorded on a card, refer to -78-. ≥When recording pictures onto a card, the recording start/stop button is disabled. 28 LSQT0861