Panasonic PVDF2735 PVDF2035 User Guide - Page 18

MTS Broadcast / TV Stereo System DISPLAY Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with a " " mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the "Audio Mode for TV Viewing" section. AUDIO 1 Press DISPLAY to display the broadcast signal being received. MTS Stereo broadcast: Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode. • If stereo broadcast is weak and the display flickers, select MONO audio mode for possible improvement. 12:00AM CH 08 STEREO SAP MONO Equipped with -TV Noise Reduction for true MTS reproduction. -TV Noise Reduction is required for good stereo separation and audio fidelity. is a registered trademark, and is licensed by Technology Licensing. Audio Mode for TV Viewing 1 Press AUDIO to select the desired audio mode as described above. (Arrow shows selection.) • Each press of AUDIO will change the audio mode as shown below. • "SAP" is selected with first press of AUDIO. < Example > 12:00AM CH 08 STEREO SAP MONO 12:00AM CH 08 STEREO SAP MONO 12:00AM CH 08 STEREO SAP MONO SAP broadcast: Secondary Audio Program (sub language). Select SAP audio mode for the sub language. 12:00AM STEREO SAP MONO CH 08 MTS Stereo and SAP broadcast: Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select the STEREO or SAP audio mode. 12:00AM STEREO SAP MONO CH 08 MONO broadcast: Normal monaural sound broadcast. 12:00AM STEREO SAP MONO CH 08 18 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo