Panasonic PVGS55 PVGS55 User Guide - Page 10

BEFORE USE, QUICK GUIDE, Inserting a Cassette, Recording on a Tape

Page 10 highlights

Before Use Quick Guide 1 Attach the Battery to the AC Adaptor and charge it. ª Inserting a Card 1 Slide the [OPEN] Lever 1 to open the Card Slot Cover 2. 2 While holding the Memory Card with its cut corner facing right 4, insert it into the Card Slot 3. 3 Close the Card Slot Cover 2 securely. ≥Before use, fully charge the Battery. ≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor. ≥The [CHARGE] Lamp lights up, and charging starts. ≥When the [CHARGE] Lamp goes off, charging is completed. 2 Attach the charged Battery to the Palmcorder. OPEN 1 3 2 4 ª Recording on a Tape 1 Set the [OFF/ON] Switch 1 to [ON]. ≥The [POWER] Lamp 2 lights up. ON 1 2 POWER 2 Set the Mode Dial to Tape Recording Mode. OFF PC SD OPEN / EJECT ª Inserting a Cassette 1 Slide the [OPEN/EJECT] Lever 1 toward the front and pull down to open the Cassette Compartment Cover. 2 Insert a Cassette. 3 Press the Recording Start/Stop Button. ≥Recording starts. 1 3 Close the Cassette Holder by pressing the [PUSH] mark 2. 4 Close the Cassette Compartment Cover. 2 PUSH PC 4 Press the Recording Start/Stop Button again to pause the recording. ª Recording a Still Picture on a Card (Photoshot) 1 Set the Mode Dial to Card Recording Mode. SD 2 Press the [PHOTO SHOT] Button. PHOTO SHOT -10-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Before Use
-10-
Quick Guide
1
Attach the Battery to the AC Adaptor and
charge it.
Before use, fully charge the Battery.
Since the Battery will not be charged when
the DC Cable is connected to the AC
Adaptor, disconnect it from the AC Adaptor.
The [CHARGE] Lamp lights up, and charging
starts.
When the [CHARGE] Lamp goes off,
charging is completed.
2
Attach the charged Battery to the
Palmcorder.
ª
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
1
toward
the front and pull down to open the
Cassette Compartment Cover.
2
Insert a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark
2
.
4
Close the Cassette Compartment Cover.
OPEN /
EJECT
1
PUSH
2
ª
Inserting a Card
1
Slide the [OPEN] Lever
1
to open the Card
Slot Cover
2
.
2
While holding the Memory Card with its cut
corner facing right
4
, insert it into the Card
Slot
3
.
3
Close the Card Slot Cover
2
securely.
ª
Recording on a Tape
1
Set the [OFF/ON] Switch
1
to [ON].
The [POWER] Lamp
2
lights up.
2
Set the Mode Dial to Tape Recording Mode.
3
Press the Recording Start/Stop Button.
Recording starts.
4
Press the Recording Start/Stop Button
again to pause the recording.
ª
Recording a Still Picture on a Card
(Photoshot)
1
Set the Mode Dial to Card Recording Mode.
2
Press the [PHOTO SHOT] Button.
4
2
1
3
OPEN
ON
OFF
1
2
POWER
PC
S
D
PC
S
D
PHOTO SHOT