Panasonic PVGS55 PVGS55 User Guide - Page 62

Others 0: Remaining Number of Photoshot ≥Digital Zoom [D.ZOOM] pictures ≥1/750 s or faster shutter speed R:0h00m: Remaining time of MPEG4 ≥When brightness is insufficient : RapidFire Consecutive ≥When the MagicPix Function is ON Photoshot Recording -27- ≥When the Portrait Mode is used : Lock Setting -43- When using Card Recording Mode ¥ (White): DPOF Setting completed (set to ≥When brightness is insufficient 1 or more picture) -43- ≥When the MagicPix Function is ON 640 : [640k480] Image size ≥For images not recorded with this Palmcorder, Initializing the Modes the size display is determined as follows according to the number of horizontal pixels. 640 : 640 or more, less than 800 (The size is not displayed at under 640 pixels.) SVGA : 800 or more, less than 1024 XGA : 1024 or more, less than 1280 SXGA : 1280 or more, less than 1600 UXGA : 1600 or more, less than 2048 QXGA : 2048 or more You can change the Menu settings back to the shipping condition. 1 Set [INITIAL] >> [INITIAL SET] >> [YES]. ≥The initializing takes for a little while. ≥After the initializing is completed, the [COMPLETED] Indication appears with beeps. ≥Initializing will not erase the clock setting (-24-) that has been adjusted. PICTURE (Cyan): Photoshot Mode Warning/Alarm Indications PICTURE (Red): While Photoshot recording is activated PICTURE (Green): While the card is being read PICTURE (Red): No Card (Still Picture Mode) MPEG4 (Cyan): Moving Picture (MPEG4) Recording Mode MPEG4 (Red): While Moving Picture (MPEG4) recording is activated ª To Change the Counter Display Mode By changing [C.DISPLAY] on the [DISPLAY] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication [COUNTER] (0:00.00), Memory Counter Indication [MEMORY] (M0:00.00), and Time Code Indication [TIMECODE] (0h00m00s00f). (-21-) By repeatedly pressing the [DISPLAY] Button on the Remote Controller, you can change the Counter Display Mode. If any one of the following indications lights up or flashes, please check the condition of the Palmcorder. 3DEW (DEW DETECT/EJECT TAPE): Condensation has occurred. -70Y (CHECK REC TAB): The accidental erasure prevention switch on the inserted Cassette is open (that is, set to [SAVE]). You are attempting Audio dubbing or Digital dubbing on a Tape while setting the accidental erasure prevention switch to [SAVE]. Y (TAPE NOT INSERTED): No Cassette in inserted. -186 (LOW BATTERY): The Battery is low. Recharge it. -160: The built-in battery is low. -24- ª To Display Date/Time Indication : (NEED HEAD CLEANING): To display Date/Time Indication, set the appropriate Date/Time in [DATE/TIME] on the The video heads are dirty. -712END (TAPE END): [DISPLAY] Sub-Menu. (-21-) The tape came to end during recording. You can also press the [DATE/TIME] Button of REMOTE (CHECK REMOTE MODE): the Remote Controller repeatedly to display or Wrong Remote Controller Mode has been change the Date/Time Indication. selected. -15- ª To Change the Display Mode By changing [DISPLAY] on the [DISPLAY] Sub-Menu, you can change the Display Mode to All Function Display [ALL] and Minimum Display [OFF]. (-21-) ª Progressive Photoshot UNPLAYABLE TAPE (OTHER FORMAT): You are attempting to play back a tape section that has been recorded with a different TV system. UNABLE TO A.DUB (LP RECORDED): You cannot use the Progressive Photoshot Because the original recording was done in Function in the following cases. LP Mode, audio dubbing cannot be When using Tape Recording Mode performed. ≥Digital Effect Modes in [EFFECT1] -62-