Panasonic SAAK62 SAAK62 User Guide - Page 14

Radio operations 1 2 1 2 3 SC-AK77 SC-AK66 SC-AK62 TUNED STEREO 4 A Listening to radio broadcasts Press [TUNER, BAND] to select band. The unit comes on automatically. Every time you press the button: FM ↔ AM Press [L TUNE MODE] to select "MANUAL". Every time you press the button: 4 MANUAL ↔ PRESET. Press [TUNE/TIME ADJ (3) or (4)] to select the 3 frequency of the required station. "TUNED" is displayed when a radio station is tuned. "STEREO" ("ST" for SC-AK66 and SC-AK62) is displayed when a stereo FM broadcast is being received. Adjust the volume. MHz Auto tuning Press and hold [TUNE/TIME ADJ (3) or (4)] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. • Auto tuning may not function when there is excessive interference. • To cancel auto tuning, press [TUNE/TIME ADJ (3) or (4)] once again. A If noise is excessive in FM Press [ g/( FM MODE/BP] to display "MONO". This mode improves sound quality if reception is weak, but broadcasts will be heard in monaural. Press [ g/( FM MODE/BP] again to cancel the mode. "MONO" goes out. MONO is also canceled if the frequency is changed. Turn off "MONO" for normal listening. Stereo and monaural MHz broadcasts are automatically played as they are received. FM allocation setting By adjusting the allocation, you can enable this tuner to receive FM broadcasts allocated in 0.1 MHz steps. Press and hold [TUNER, BAND]. After a few seconds, the display will change to a flashing display of the current minimum FM frequency. If you continue to hold the button down, the minimum frequency will change. Release the button at this time. MHz TUNED ST To return to the original frequency indication, repeat above. Note • After changing the "allocation" setting, the frequencies you previously preset in the memory will be cleared. • Sound is momentarily interrupted if you load/unload tapes while listening to an AM broadcast. 14 RQT5769 MONO