Panasonic SAAK62 SAAK62 User Guide - Page 34
Timer and others, Using the timer, Using the play/record timer
View all Panasonic SAAK62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Using the timer Using the play/record timer PLAY/ REC Using the sleep timer by remote control only This timer turns your system OFF at the set time (Max. 2 hours, settable at 30-minute intervals). It lets you fall asleep listening to music. Preparation Switch on the power. The figure shows how to set the system to standby mode after 30 minutes. To change the timer Press [rPLAY/rREC] to select the desired timer. Every time the button is pressed the setting changes as follows. PLAY REC ((OOFFFF)) To check settings While the unit is on and the "rPLAY" (or "rREC") indicator is on, press [CLOCK/TIMER] so "rPLAY" (or "rREC") appears on the display. Two seconds after "rPLAY" (or "rREC") appear, the settings are displayed in the following order: • For play timer 1 Play start time • For record timer 1 Recording start time 2 Play finish time 2 Recording finish time 3 Play source 3 Recording source 4 Playback volume You can check the settings even when the system is OFF by pressing [CLOCK/TIMER] twice. To enjoy the desired source after the timer setting is completed The volume level (for play timer) and music source are stored in the timer memory and the timer will start in these preset conditions. However, the Disc numbers and reverse mode (for SC-AK77) do not get stored in the timer memory. 1. After step 4, start playing the desired source. 2. Reset the Disc numbers and reverse mode (for SC-AK77) if you have changed any of them, confirm that a Disc or cassette is inserted, then press [f/7, POWER] to put the unit on standby. Notes • If you switch the system to the standby mode while the play/record timer is functioning, the OFF time setting will not be activated. • If "AUX 1/2" (SC-AK66 and SC-AK62: "AUX") or " 6CH INPUT" is selected as the source, when the timer comes ON, the system will turn ON and will engage "AUX 1/2" (SC-AK66 and SC-AK62: "AUX") or " 6CH INPUT" as the source. If you want to playback or record from a connected component, set the component's timer to the same time. (See the instruction manual that came with the component.) Timer and others 34 RQT5769 While enjoying the desired source: Press [SLEEP] to select the desired time. Every time you press the button: SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120 SLEEP OFF The system is turned off after the set time has elapsed. To cancel the sleep timer: Press [SLEEP] to select "SLEEP OFF". To confirm the remaining time: (only while system is ON) Press [SLEEP]. To change the time remaining during operation: Press [SLEEP] to show the remaining time then press [SLEEP] to select the desired time. Notes • The sleep timer turns OFF automatically the moment you attempt to edit-record a CD using CD Manager function. • The sleep timer can be used in combination with the play/record timer. The sleep timer always has priority. Be sure not to overlap timer settings.