Panasonic SAAK62 SAAK62 User Guide - Page 19

4 2 1 2 3 4 5 7 A B Compact disc operations 3 5 1 7 DISC PRGM DISC Specified disc number DISC Specified track number Program order DISC DISC DISC Indicates program mode DISC Listening to compact discs Program play bbyy rreemmoottee ccoonnttrrooll oonnllyy You can program up to 24 tracks. Press [CD]. Ensure CD is stopped. Press [PROGRAM]. Press [DISC]. (within 10 seconds or so) Press [1] - [5] to select the disc you want. Press the numeric button to select the desired track. Repeat steps 3 through 5 until you have programmed all the tracks you want. Press [-/4]. Play will start in the programmed sequence. To cancel program play mode Press [PROGRAM] in the stop mode. Programmed contents will be saved in memory. Pressing [L/ CLEAR] will cancel program play, but it will also erase the entire program. To select a two-digit track Press [≥10] and then the two numbers you want. A When "CD FULL" appears The number of programmed tracks is limited to 24. No further tracks can be programmed. B You can do the following during program mode • Check program contents. Press [g/(] or [)/f]. Every time you press one of the buttons, the track and program No. are shown on the display. • Add to the program. Repeat steps 3 through 5. • Cancel entries. From the last programmed track A specified track only All tracks Press [CANCEL]. Select the track with [g/(] or [)/f], and press [CANCEL] within 3 seconds. Press [L/CLEAR]. Memory retention Your program is retained in memory for about 2 weeks while the system is unplugged. To replay your program If you turned OFF your program with [PROGRAM], you can play it again as explained below. 1. Press [PROGRAM]. 2. Press [-/4]. If you program a track not on your CDs The track is initially programmed, but during program play, the player will skip that track and will continue playing from the next programmed item. 19 RQT5769