Panasonic SXKN2400 SXKN2400 User Guide - Page 149
Mono/poly Mode, Vibrato Rate
View all Panasonic SXKN2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Part VIII Sound Sound FILTER RESONANCE: Use the RESO ∧ and ∨ buttons to adjust the amount of resonance (0 to 127). ATTACK TIME: Use the ATT ∧ and ∨ buttons to specify the attack time (0 to 127). DECAY TIME: Use the DEC ∧ and ∨ buttons to specify the decay time (0 to 127). RELEASE TIME: Use the REL ∧ and ∨ buttons to specify the release time (0 to 127). BRIGHTNESS: Use the BRI ∧ and ∨ buttons to adjust the bright- ness of the sound (0 to 127). VIBRATO RATE: Use the RATE ∧ and ∨ buttons to specify the vibrato speed (0 to 127). VIBRATO DEPTH: Use the DEP ∧ and ∨ buttons to specify the vibrato depth (0 to 127). VIBRATO DELAY: Use the DEL ∧ and ∨ buttons to specify the time interval from when the keys are played until the vibrato starts (0 to 127). • The center value is 64 (±0). MONO/POLY MODE: Use the MONO/POLY ∧ and ∨ buttons to select the output mode. PORTAMENTO: Use the PORTAMENTO ON/OFF buttons to enable or disable the portamento function. (Portamento is a continuous gliding movement from one tone to another.) Use the ∧ and ∨ buttons to specify the porta- mento time. • PORTAMENTO does not function for the POLY MODE. MODULATION SENSITIVITY: Use the MOD SENS ∧ and ∨ buttons to adjust the sensitivity of the MODULATION. • Use the MSB ∧ and ∨ buttons (half-tone increments) and the LSB ∧ and ∨ buttons to adjust the setting. BEND RANGE: Use the BEND RANGE ∧ and ∨ buttons to spec- ify the PITCH BEND range (0 to 12). Increments are in semi-tones. • The higher the number, the greater the change in pitch when the PITCH BEND wheel is operated. 149 QQTG0692