Panasonic SXKN2400 SXKN2400 User Guide - Page 182
Common Setting
View all Panasonic SXKN2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
MIDI Part XIII MIDI Common Setting Set the functions which are common to all parts. 1. On the MIDI MENU display, select COMMON SETTING. • The display looks similar to the following. 2. Use L and M buttons to select the item. NOTE ONLY: Of the performance data, specify whether or not only note data is exchanged. PROGRAM CHANGE TO P. MEM: Enable or disable the exchange of program change numbers for the RIGHT 1 part by operation of the PANEL MEMORY buttons. • For this setting, the PANEL MEMORY 1 to 8 program change numbers correspond to the bank numbers as follows: BANK A = 0 to 7 BANK B = 8 to 15 ... INTRO, FILL-IN, ENDING: Enable or disable the exchange of intro, fill-in and ending data. APC CONTROL: Enable the exchange of data for the on/off status of the AUTO PLAY CHORD's BASIC, ADVANCED and PIANIST modes. FADE IN/OUT: Specify whether or not FADE IN/OUT data is exchanged. PROGRAM CHANGE MODE NX SOUND: Program change numbers are standardized among NX SOUND Technics models which are set to this mode. The program change number assigned to a given sound on one model is assigned to the same sound on all models which are set to the same mode. PREVIOUS TECH: Program change numbers are standardized among non-NX SOUND Technics models which are set to this mode. The program change number assigned to a given sound on one model is assigned to the same sound on all models which are set to the same mode. MAP R: GS basic sounds are transmitted and received as GS program change numbers. MAP Y: XG basic sounds are transmitted and received as XG program change numbers. ∗GS is a trademark of Roland Corporation. XG is a trademark of Yamaha Corporation. DRUMS TYPE NX SOUND: Keyboard percussion instrument sounds correspond to the same key note numbers for connected NX SOUND Technics models that are set to this type. PREVIOUS TECH: Keyboard percussion instrument sounds correspond to the same key note numbers for connected non-NX SOUND Technics models that are set to this type. SONG SELECT ON: Song number data can be exchanged. OFF: Song number data cannot be exchanged. PREVIOUS MODEL MODE ON: INTRO, FILL IN, ENDING and APC CONTROL, FADE IN/OUT data are converted to CONTROL CHANGE data for previous models ∗ and then transmitted. OFF: The above settings are not converted. ∗ "Previous models" include all Technics instrument models except for: KN7000/6500/6000 PR604/804/603/703/903/1000 3. Use ∧ and ∨ buttons to change the setting. 4. Repeat steps 2 and 3 for the other settings as desired. 182 QQTG0692