Panasonic SXKN2400 SXKN2400 User Guide - Page 190
COMPOSER, MIDI IN, Phenomenon, Remedy, Disk/SD card, Other
View all Panasonic SXKN2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
COMPOSER Disk/SD card Phenomenon Remedy Storage is not possible. • The remaining memory capacity of the COMPOSER is 0. Setting the time signature is not possible. • The time signature cannot be changed for a pattern which is currently recorded in the COMPOSER. If you wish to change the time signature, first follow the procedure to clear the memory. (Refer to page 107.) The playback timing of the rhythm pattern is dif- • The QUANTIZE function was on when the pattern was ferent from the timing with which it was recorded. recorded and the timing was automatically corrected. Set the quantize level to a smaller note unit or to OFF when recording. (Refer to page 108.) The Disk Drive produces a noise during recording • This occurs when the Disk Drive is reading a disk. It or playback. does not indicate a problem. When the procedure to load from a disk/SD card • When performing the load operation from a disk/SD is per-formed, the contents of the keyboard mem- card, the keyboard memory changes to that of the data ory are erased. loaded from the disk. If you wish to preserve a song which is stored in the keyboard memory, save it on a disk/SD card before performing the load procedure. Data cannot be exchanged through MIDI termi- • Match the channels on the transmitting side and the nals. receiving side. (Refer to page 180.) The sound quavers or is distorted. • When the USB terminal or both the MIDI IN and OUT terminals are connected to a computer, depending on the computer software the received data may be sent back to the instrument just as it is. Because of this the sound generated from the keys and the sound generated from the returned data are both produced, causing undesirable effects, such as the sounds canceling each other out, for example. In this case, either change the software settings to prevent received data from being returned, or set the MIDI LOCAL CONTROL to off. Noise from a radio or TV can be heard. • This sometimes occurs when electrical equipment such as a radio or TV is used near the instrument. Try moving such electrical equipment further away from the instrument. • The sound may be coming from a nearby broadcast station or amateur radio station. If the sound is bothersome, consult your dealer or service center. The cabinet becomes warm during use. • This instrument has a built-in power source that heats the cabinet to some degree. This is not an indication of trouble. MIDI Other 190 QQTG0692