Panasonic SXKN2400 SXKN2400 User Guide - Page 85
Auto Punch Record, Start/stop
View all Panasonic SXKN2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Part IV Sequencer 6. During playback, press the PUNCH IN button at the point you want to begin recording. • Recording begins as soon as the PUNCH IN button is pressed. Begin playing at this point. • The REC indication changes to the PUNCH indication. • The PUNCH IN button switches to the REC STOP button. 7. Press the REC STOP button at the point you want to stop recording. • Punch recording stops immediately. • You can also begin punch-in recording by playing the keyboard. • You can specify the punch-in/punch-out points with the optional Foot Switch (sold separately). (Refer to page 172.) Ⅲ AUTO PUNCH RECORD You can also set the punch-in and punch-out points beforehand, so that recording automatically begins and ends at the specified points. 1. On the PUNCH RECORD display, press the AUTO: OFF button. • The display looks similar to the following. 6. Press the START/STOP button. • Playback begins from the measure indicated by CURRENT MEASURE on the display. • Pertinent information, such as the FIRST MEASURE, is shown in the upper section of the display. 7. Correct the performance. • The mode changes automatically to the recording mode at the specified FIRST measure. Begin playing at this point. The mode automatically changes back to the playback mode at the specified LAST measure. • To discontinue punch recording in the middle, press the CANCEL button. In this case, the recorded contents up to that point are erased. Sequencer 2. Use the FIRST MEASURE ∧ and ∨ buttons to specify the number of the punch-in measure. 3. Use the LAST MEASURE ∧ and ∨ buttons to specify the number of the punch-out measure. • The number of the LAST measure must be higher than the number of the FIRST measure. • The specified measure is recorded. 4. Use the COUNT IN MEASURE ∧ and ∨ but- tons to specify the number of lead-in measures you wish to have played back before the punch-in measure. • Set the metronome to on or off with the ON or OFF button. 5. Press the EXIT button. • The display changes to the PUNCH RECORD display. 85 QQTG0692