Panasonic WJ-PR204 Operating Instructions - Page 33
channel Receiver Side Unit connection example
View all Panasonic WJ-PR204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4 Connecting the Unit 4-channel Receiver Side Unit connection example In this example, the camera is powered by PoE and the receiver side unit is powered by an AC adaptor. E G D A C B D A C DA F C DA C Ethernet cable (Cat-5e or higher, straight) Ethernet cable (Cat-5e or higher, straight) Coaxial cable Camera Camera side unit Receiver side unit Switching hub IMPORTANT • A BY-HPE11KTA coaxial LAN converter cannot be connected. • Use Cat-5e or higher Ethernet cables. • Use 8-wire (4-pair) Ethernet cables. • Use an Ethernet cable to connect the camera directly to the camera side unit. Do not connect a hub between the camera and the camera side unit. When a PoE or PoE+ camera is powered by an external power supply, use a PoE incompatible cable (included with the camera side unit) to connect the camera to the camera side unit. • After disconnecting an Ethernet cable, wait at least 2 seconds before connecting it again. If the cable is reconnected too quickly, power may not be supplied form the PoE power supply. • Some crossover-type Ethernet cables cannot supply power using PoE. Operating Instructions 33