Panasonic WJ-PR204 Operating Instructions - Page 35
IMPORTANT, Connecting the Unit, To receiver side unit, BNC connector, Coaxial cable
View all Panasonic WJ-PR204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4 Connecting the Unit 2. First pass the coaxial cable through the BNC connector cover (accessory), then connect the coaxial cable to the BNC connector of the camera side unit. BNC connector Coaxial cable BNC connector cover To receiver side unit (Included parts of camera side unit) IMPORTANT • When connecting the coaxial cable to the unit, make sure that no other devices are connected to the coaxial cable. Connecting the coaxial cable to the unit when there are other devices connected (such as an analog CCTV camera), may cause damage to the connected device. • When using existing coaxial cables, disconnect other devices that are connected to the coaxial cable before connecting to the unit. • Measure the insulation resistance of the coaxial cable (new or existing) before making connections. Insulation resistance value: 1 MW or more for DC 500 V • Confirm the length of the coaxial cable when using the PoE function (see page 30, page 32). Operating Instructions 35