Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions - Page 144
Recommended ND filter display, Macro display
View all Panasonic microP2 Handheld AVC-ULTRA HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Chapter 7 Display - Screen status display 11 Date and time display The display order is determined by the area setting. [NTSC]: "mmm dd yyyy hh:mm:ss" [NTSC (J)]: "yyyy mmm dd hh:mm:ss" [PAL]: "dd mmm yyyy hh:mm:ss" ffmmm: Month (JAN (January), FEB (February), MAR (March), APR (April), MAY (May), JUN (June), JUL (July), AUG (August), SEP (September), OCT (October), NOV (November), DEC (December)) ffdd: Date ffyyyy: Year (2000 to 2037) ffhh: Hour ffmm: Minute ffss: Second 12 Audio level meter display Switches between level meter display and audio output channels 1/2 and 3/4 while holding down the USER button where [AUDIO MON SEL] is assigned. 13 Audio recording not possible display Displayed when audio recording is not possible during variable frame rate mode native recording, interval recording, or one shot recording. 14 Digital zoom display Displays the digital zoom ratio. ff[D2×]: two times ff[D5×]: five times ff[D10×]: ten times 15 Y GET brightness display In the Y GET mode, the image level in the frame displayed near the center of the screen is displayed as 0% to 109%. 16 ND filter display Displays the selected ND filter. 17 Shutter speed display Displays the shutter speed. When synchro scan is performed, the display shows the content set in the main menu → [SCENE FILE] → [SYNC SCAN TYPE] (time (minutes) or open angle image). 18 switch position display Displays the position currently selected. Also, the white balance operation is indicated when the automatic white balance is preset. In auto tracking white balance (white balance with automatic tracking) mode, [ATW] is indicated, and when auto tracking white balance mode is locked, [LOCK] is indicated. 19 Auto iris control display ff[STD]: Standard auto iris control ff[SPOT]: Auto iris control for spotlighting ff[BACK]: Auto iris control for the backlight compensation 20 Gain display Displays the gain value of the image amplifier configured. 21 Iris display Displays the F value. 22 Zoom position display Displays the zoom position with [Z000] (maximum wide angle) to [Z999] (maximum telephoto). Change the unit to millimeters in the main menu → [DISPLAY SETUP] → [ZOOM/FOCUS]. @@NOTE tt When the USER button where [FAST ZOOM] is assigned is pressed to switch the status, [Z] is displayed in white letter with outline. 23 Focus control information display Displays the focus control information with [99] to [00]. [AF] is indicated for auto focus, and [MF] is indicated for manual focus. Also, when [MF ASSIST] is set to [ON] in the main menu → [SW MODE] while in manual focus mode, [MA] is indicated. [95] (distance to the subject: infinity) to [00] (distance to the subject: approx. 5 cm) Depending on the zoom position, the subject may not be within the macro range. Also, depending on the zoom position, the lowest value of the macro range may vary. The display unit can be changed to feet or meters from the main menu → [DISPLAY SETUP] → [ZOOM/FOCUS]. 24 Macro display Displayed while macro shooting is performed. 25 Recommended ND filter display Displays the ND filter recommended for the current shooting conditions. 26 Camera warning, notification display area (pages 178, 146) 27 Area frame display Displayed when the control stick is pressed when the function is assigned in the main menu → [SW MODE] → [AREA MODE]. 28 Area display Displayed when in area mode. 29 Flash band compensation function display Displayed when the flash band compensation function is activated. 30 Dynamic range stretcher function display Displayed when the dynamic range stretcher function is working. - 144 -