Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions - Page 71
Convenient shooting functions, Low angle shooting, Scan reverse shooting, Zebra patterns display
View all Panasonic microP2 Handheld AVC-ULTRA HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 4 Shooting - Convenient shooting functions Convenient shooting functions Low angle shooting When shooting at low angles, releasing the hold cover on the REC button on the handle from the position will allow shooting with the REC button on the handle. ffTo prevent accidental operation of the REC button on the handle when it is not in use, keep the hold cover to the position. Scan reverse shooting Set [ON] in the main menu → [SYSTEM MODE] → [SCAN REVERSE] to display and record the image in vertically or horizontally reverse. Zebra patterns display The camera can display two types of zebra patterns. Press the button displays the zebra pattern that is set in the menu. Zebra patterns can also be displayed in the video of the monitor output terminal (, , ) according to settings. The level for zebra pattern display can be set in the main menu → [DISPLAY SETUP]. [ZEBRA1 DETECT] Item [ZEBRA2 DETECT] [ZEBRA2] Description of settings Sets the extraction level of zebra pattern 1. [0%]...[109%] ffFactory setting: [70%] Sets the extraction level of zebra pattern 2. [0%]...[109%] ffFactory setting: [85%] Sets on/off of zebra pattern 2 and selects the type. [ON], [SPOT], [OFF] ffFactory setting: [SPOT] [SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern. Image level [109%] [ON] [ZEBRA2] [OFF] [SPOT] [ZEBRA2 DETECT] [ZEBRA1 DETECT] [0%] To display the zebra patterns in the video of the monitor output terminal (, , ), set in the main menu → [OUTPUT SEL] → [VIDEO OUT ZEBRA]. Displaying the center marker Displays when setting an item other than [OFF] in the main menu → [DISPLAY SETUP] → [CENTER MARK]. @@NOTE tt The center marker display is not displayed in the images of terminals , , and . Displaying the safety zone marker The items you select the main menu → [DISPLAY SETUP] → [SAFETY MARK] are displayed. The size of the safety zone marker can be changed in the main menu → [DISPLAY SETUP] → [SAFETY AREA]. - 71 -