Pentax 17191 V20 Operating Manual - Page 156

9 Use the four-way controller (2345) to choose the paper size. You can only choose a size that is supported by your printer. 10 Press the 4 button. Paper Size Setting Card L 100×150 Postcard 4"×6" MENU Cancel 2L 8"×10" A4 Letter 11"×17" A3 OK OK The Paper Size setting is saved, and the screen returns to the print settings screen. 11 Use the four-way controller (23) to select [Paper Type] and press the four-way controller (5). A pull-down menu appears. 12 Use the four-way controller (23) to select the paper type and press the 4 button. The Paper Type setting is saved, and the screen returns to the print settings screen. Set [Quality] and [Border Status] in the same way as in Steps 11 and 12. If you select [_ Setting] for each print setting, images are printed according to the settings made on the printer. 6 Paper Type with more E supports higher quality paper. Quality with more E indicates higher print quality. A confirmation dialog appears after each item has been set. 13 Press the 3 button. The screen returns to the confirmation dialog. 14 Press the 4 button. The image is printed according to the settings. Press the 3 button to cancel printing. Editing and Printing Images • The self-timer lamp lights while the camera is communicating with the printer, and blinks while the card is being accessed and during printing. Do not disconnect the USB cable while the self-timer lamp is blinking. • The [Paper Size], [Paper Type], [Quality] and [Border Status] settings are reset to the defaults when the camera is turned off. • If the picture already has the date imprinted on it (p.105), do not set Date O (On) in DPOF settings. Otherwise, the date could be imprinted twice on your printed picture. Disconnecting the Cable from the Printer 1p.156 154